To use the Zebra you'll need two files and to configure it in the SellerChamp Account Setup Page.
Proceed with setting up your printer as follows:
1. Got to Zebra's Support page and download the appropriate UPS driver for your system.
After downloading the driver, install it on your computer. Then Proceed to the next step.
3. Once Print Browser Software is downloaded and installed, run the software on your machine so it is active in the background. It will be active in the task bar showing a tiny Zebra Symbol. You can right click and click "Settings". it will open the dialog box and show your printer and accepted hosts.
4. Your printer should now be online. Go back into your SellerChamp Account Setup Page and the dialog should come up again. This time though Navigate to the localhost link and follow the directions. You may need to "Accept" or "Proceed" to enable the integration; or you may have to expand the 'Advanced' section to see the "Proceed" link.
Once there the screen will look like gibberish..this is normal. You can close the tab, navigate back here and click the "Close" button on the dialog box. Then click "Save Changes". The printer should now work properly.
5. Click "Print Test Label" and a label should come out of the printer. You can then adjust the Left and top Offsets until the print is on the label in the desired location. Your printer is now ready for use.